Tool

Deck cost calculator for Gainesville

Set the size, pick a material, add what you want on top of it, and the tool returns a working range. The figures come from current installed pricing in this market. Nothing here is a quote: the number that counts arrives after somebody has stood in your yard with a tape.

Which decking material?

The surface sets the bracket. The frame under it is treated lumber whichever surface you pick.

Deck area in square feet 320

A table with chairs that pull out wants roughly twelve feet across. Most family decks land between 250 and 450 square feet.

How high above the ground?

Height drives post length, bracing, guard length, and the number of stair treads, which is why it moves the number so much.

What else is in the scope Stairs down to the yard. Stringers, treads, a landing, and a guard down both sides. A roof over part of it. Framing, tie-in to the house roof, and heavier footings underneath. Screening it in. Screen frame, mesh, kickplates, and a door that latches. Taking an old deck out first. Demolition, disposal, and making good where it was fixed to the house. Awkward access. No gate wide enough for a machine, a steep yard, or trees to work around.

Planning range

$16,000 to $34,000

320 sq ft of capped composite

Get a real quote

or call (352) 301-3643

Reading the number

These ranges cover installed work: framing, footings, the decking surface, guards, fasteners and hardware, and the labour to put it together. They do not cover landscaping put back beyond rough grade, electrical work, a hot tub and the structure to carry it, or permit fees, which vary by jurisdiction and by the value of the contract.

The single biggest lever after material is height. A deck a step down from the door needs short posts, little bracing, minimal guard, and two or three treads. The same deck a full storey up needs long braced posts, guard down every open edge, and a full flight of stairs with a landing, and it can cost half as much again for exactly the same square footage.

A roof is not an add-on, it is a second structure. It brings dead load and wind uplift down through the deck framing into the footings, which means larger footings and a continuous run of connections, and it usually involves a tie-in to the existing house roof. That is why the number moves so sharply when the box is ticked.

The full cost guide breaks each of these down, and the main guide covers how a project is scoped before any of it is priced.

Material sets the bracket and everything else moves you inside it: height off the ground, stair count, access for a machine, and how much of the structure has to be built rather than resurfaced.

Ready to put a number on the deck you have been picturing?

Call (352) 301-3643 or use the quote form for a free quote. A local deck company handles it from there.

Call (352) 301-3643 Request a free quote